The construction industry is pretty complex. That’s the reason there is never-ending equipment in use. For this reason, we are talking about mann lift, which is a well-known aerial work platform. It has been designed to lift your workers as well as their equipment on work sites, outdoors or indoors. These are also known as personnel lifts and personal lifts.
However, there are different types of mann lifts out there for different purposes. That’s the reason we are sharing information about different types.
Types of Mann Lifts
These lifts have become an essential part of the construction industry. There is a variety of mann lifts for different purposes, and we are shedding light on all of them!
1. Mann lifts That Move On Their Own
The one that moves itself is the smallest of the bunch. One person and a set of tools can be lifted 15 to 20 feet in the air by the small lift. Because it’s small, it’s easy to get through doors.
Self-propelled lifts can reach ladder heights, but they are more stable because they don’t move on wheels. The frame can be folded up, which makes it great for working on small projects inside that need a modest height boost.
2. Men’s Push-Around Pushes
Self-propelled man lifts are a bit smaller than push-type man lifts. They can reach heights of 15 to 50 feet, which lets a single person and their tools get into tight spaces like between rafters or next to an HVAC unit. Even photographers can use the push-around lift to get a view from above the crowds.
The frame of the lift can be folded up, and the hydraulic wheels make it easy for one or two people to move it through doors and along hallways. Push-around lifts have removable outrigger legs that keep the base from tipping. This is because the frame is light (it can hold between 200 and 400 pounds), and the vertical reach is long.
Atrium lifts, which are also called compact crawler lifts, are the biggest of the group. The heavy-duty lift works best on building sites that are outside. The atrium can sit safely on uneven areas like dirt, sand, and mud because it has legs that fold up and drive tracks that look like tank treads.
The long neck can reach heights of more than 34 feet and turn in all directions. The jib joint makes it possible to move around trees and power lines. Some types of lifts run on batteries, while others use gasoline or diesel.
4. Boom Raise
These lifts have a moving arm called a “boom” with a bucket on the end that can hold a person. There are two main types of boom lifts, which are:
These man lifts have a beam that can be extended in almost any direction by expanding it. They are a good choice for outdoor uses that need a range of 100 feet or more.
A knuckle boom is another name for a boom lift that moves in different ways. It has a lot of joints that let the arm move around things. Repairs to power lines, tree trimming, and building upkeep are all common uses.
5. Scissor Lifts
A scissor lift is a platform with rails that sits on top of crisscrossed metal supports that move up and down. Scissor lifts are more stable than boom lifts and can carry heavier loads of people and equipment. However, they can only reach about 40 to 60 feet in height, based on the model. Some types of scissor lifts are:
These lifts don’t need fuel to run, and they don’t make much noise, so they’re great for use inside.
A rough terrain scissor lift has bigger tires and other features that make it more stable when working on rough or uneven ground. They can also get to the job spot no matter what kind of terrain there is.
6. Vertical Staff Lifts
Most of the time, these man lifts can hold one person and up to 300 pounds of weight. They work well in places like warehouses where they are used to reach higher shelves or order-picking spots. Most vertical people’s lifts move straight up and down, like scissor lifts.
What’s The Difference Between A Mann Lift and A Boom Lift?
Boom lifts are related to the mann lift, but not very closely. Both allow operators to do work in areas that are high in the air. But boom lifts are different in a number of ways from standard mann lifts.
Boom lifts can be attached to work trucks and other vehicles to lift things up high. The arm extension, or jib, can be telescoping or moveable, giving it a wider range of motion than mann lifts and making it easier to work at odd angles. On most types of boom lifts, the work platforms are usually bigger than the mann lifts.
In short, a mann lift is the same thing as a boom lift, but a boom lift is not always a mann lift. Both of these are AWPs, but they are not in the same group. Like how there are different kinds of mann lifts, there are different kinds of boom lifts for different kinds of building work.
How Much Does A Mann Lift Rental Cost?
How much it costs to rent a mann lift depends on how many hours, days, weeks, or months you need it. From $100 to $200 per day, $200 to $900 per week, or $500 to $2,000 per month, you can rent a mann lift. This is not a full list, but it gives you an idea of what to expect.
When renting building tools, it’s important to think about how big the job is, what kind of lift is needed, and how long it will be used. Make sure you plan for the cost of gas in your budget. An electricity socket can power an indoor lift like a self-propelled mann lift. Mann lifts that are used outside, like an entryway, can run on batteries or gasoline.
Read More: What Is TrackFast?
If you don’t have the money to buy a mann liftt right away, you might be better off borrowing one. The last step is to know what to look for when picking out a mann lift.
The Safety Tips for Using a Mann Lift
Operating a lift can be pretty challenging, even though the systems have become better over the past few years. This is important to talk about because your safety is essential and we are sharing some things that you’ve to remember, such as;
Leave space around the base and the edge
When using a lift, make sure that no one is near the base or the whole edge of the lift. People standing below can get seriously hurt if tools fall from the platform because the lift’s circle is usually pretty big. By leaving the whole area clear, the chance of someone getting hit by falling debris is lower. They can also fall over, though this doesn’t happen very often. If you clear the area under and around the lift, it will be less likely that someone will get hurt if the whole structure falls.
Hire Trained Lift Workers
To keep you and your coworkers safe when using the lift, make sure that the people who are operating it have been properly trained and keep up with their safety licenses and knowledge. Potential problems can be fixed before they cause accidents on the job by giving potential employees real-world projects that test how well they understand how the lift works.
Put On Your Collar
Two simple but important safety measures are to wear a harness and make sure the strap is securely attached to the bucket. A worker could lose their balance with just a small bump from another machine or item, even if it doesn’t seem possible that they could fall off the platform. Someone could get hurt badly even if a strong gust of wind knocks them off the platform or below.
Don’t Go Over The Weight Limit
Each lift can only hold a certain amount of weight. It is very important to know and follow these limits. If this limit is pushed even a little, the lift could become too heavy on top and fall over. Usually, it’s a good idea to weigh the person operating the lift, along with all the tools and materials on the platform, to make sure that the total weight is less than the lift’s stated weight limit. Also, it’s important to know that using a lift to carry heavy things is not a good idea.
Don’t Sit Or Perch On The Edge Of A Cliff
It’s easy to want to climb up the edge of a lift platform to reach something instead of moving the lift as a whole. Some people think this is safer than it really is, though. If you stand or sit on the edge of the stage, you greatly raise the chance of falling off, which could seriously hurt you. Tell the lift operator about anything that can’t be reached so you can move to a safe spot on the platform where you can get to what you need quickly.
Stay Away From Windy Days
It is very dangerous for people to be near a lift when it is stretched very high. If the wind is strong enough, it can fall over completely. They should not be used when it is very windy or the weather is not good. This will keep the lift from tipping over. There is a maximum amount of wind that each lift can handle. Reading the user manual will help an operator understand the specific limits of the lift they are running and find ways to use the lift in bad weather.
Do Your Work On Flat Ground
The fact that lifts can reach such great heights makes them more likely to fall over. The person operating the lift and people close by will be safe if it is used on flat, firm ground. Something that can help keep the lift base stable is using the brakes on the lift correctly.
Use The Lift Correctly
Read the manufacturer’s instructions carefully and learn when it’s safe to move the lift while it’s stretched. This will help the person operating the lift. If you want to be safe, though, you should probably avoid moving the lift this way. Driving a lift while it’s out is risky; you should only do it if you have to and if the manufacturer’s instructions say it’s okay. Otherwise, the lift needs to be moved, lowered, and raised.
Look At The Record Of Inspection
Take a look at the inspection record for any moving equipment before you even think about using it. Before you can use a certain type of lift, you have to meet certain requirements. Before you start working, make sure you do the right function test. Take a walk around the lift and check that the following things are in good shape:
- Rules for emergencies
- Controls for operations
- Support beams
- Safety railings
- Tires and wheels
Also, don’t forget that there shouldn’t be any leaks of air, fuel, or hydraulic fuel. The fall protection equipment that came with the machine should be in great shape. Scissor lifts are dangerous if they are not used with great care, just like any other big machinery. All overhead lifts are required by law to be checked at least once every 30 days. These checks must be done by a qualified person and the forms must be signed off on.
Wear The Right Safety Gear
Do not use any lifts until you have the right safety gear on. Everyone who works on a lift has to wear three safety gear:
- You wear the full-body belt around your middle. This safety item will help you stand up again if you trip and fall. It can cut the chance of getting a head injury by a lot.
- Connectors need to be hooked up to a safe anchor point. Most of the time, this tie-off point is a scaffold, an L-beam, a tower, or some other strong structure.
- You will also need something to connect the body harness to an anchoring point.
Now, let’s check the next one!
Take A Look At Your Surroundings
It is very important to make sure that the surroundings do not put your safety at risk. Write down the names of any sloped places that could make moving the lift dangerous. Drop-offs, bumps, garbage, and power lines are some other interesting features.
Brushing Up On Skills Is Important
It can be dangerous to drive any kind of lift. It’s your job to keep up with the newest developments and training in your field. This includes having to go through safety training. By learning more and knowing your boundaries, you can keep bad accidents from happening at work.
Know The Steps For Shutting Down
It is important that you know how to properly shut down the machine you are using. Think about all the steps and do them over and over again. Some of these are pressing the emergency stop button and lowering the platform. The key switches must also be turned off, and the key must be taken out. Unauthorized people shouldn’t be able to get to a lift when it’s not in use.